HDR-60

Model

HDR-60-5

HDR-60-12

HDR-60-15

HDR-60-24

HDR-60-48

DC Voltage

5V

12V

15V

24V

48V

Rated Current

6.5A

4.5A

4A

2.5A

1.25A

Current Range

0 ~ 6.5A

0 ~ 4.5A

0 ~ 4A

0 ~ 2.5A

0 ~ 1.25A

Rated Power

32.5W

54W

60W

60W

60W

Ripple & Noise (max.)

80mVp-p

120mVp-p

120mVp-p

150mVp-p

240mVp-p

Voltage Adj. Range

5.0 ~ 5.5V

10.8 ~ 13.8V

13.5 ~ 18V

21.6 ~ 29V

43.2 ~ 55.2V

Voltage Tolerance

±2.0%

±1.0%

±1.0%

±1.0%

±1.0%

Line Regulation

±1.0%

±1.0%

±1.0%

±1.0%

±1.0%

Load Regulation

±1.0%

±1.0%

±1.0%

±1.0%

±1.0%

Setup, Rise Time

500ms, 50ms/230VAC 500ms, 50ms/115VAC at full load

Hold Up Time

30ms/230VAC 12ms/115VAC at full load

Voltage Range

85 ~ 264VAC (277VAC operational ) 120 ~ 370VDC (390VDC operational )

Frequency Range

47 ~ 63Hz

Efficiency

85%

88%

89%

90%

91%

AC Current

1.2A/115VAC 0.8A/230VAC

Inrush Current

COLD START 30A/115VAC 60A/230VAC

Over Load

105 ~ 160% rated output power

Hiccup mode when output voltage <50%, recovers automatically after fault condition is removed

Constant current limiting within 50% ～100% rated output voltage, recovers automatically after fault condition is removed

Over Voltage

5.75 ~ 6.75V

14.2 ~ 16.2V

18.8 ~ 22.5V

30 ~ 36V

56.5 ~ 64.8V

Protection type : Shut down o/p voltage, re-power on to recover

Working Temp.

-30 ~ +70℃ (Refer to "Derating Curve")

Working Humidity

20 ~ 90% RH non-condensing

Storage Temp., Humidity

-40 ~ +85℃, 10 ~ 95% RH non-condensing

Temp. Coefficient

±0.03%/℃ (0 ~ 50℃) RH non-condensing

Vibration

10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes; Mounting: Compliance to IEC60068-2-6

Operating Altitude

2000 meters

Withstand Voltage

I/P-O/P:4KVAC

Isolation Resistance

I/P-O/P:100M Ohms / 500VDC / 25℃/ 70% RH

MTBF

927.6K hrs min. MIL-HDBK-217F (25℃)

Dimension

53*90*54.5mm (L*W*H)

Packing

190g;60pcs/12.4Kg/0.97CUFT

1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature.

2. Ripple & noise are measured at 20MHz of bandwidth by using a 12” twisted pair-wire terminated with a 0.1μf & 47μf parallel capacitor.

3. Tolerance : includes set up tolerance, line regulation and load regulation.

4. The power supply is considered as an independent unit, but the final equipment still need to re-confirm that the whole system complies with the EMC directives. For guidance on how to perform these EMC tests, please refer to “EMI testing of component power supplies.”

5. The ambient temperature derating of 3.5℃/1000m with fanless models and of 5℃/1000m with fan models for operating altitude higher than 2000m(6500ft).