products

Product Detail

15W Single Output Industrial DIN Rail Power Supply    DR-15 series

Features:
Universal AC input/ full range
Protections: Short circuit/ Over load/ Over voltage
Cooling by free air convection
Can be installed on DIN rail TS-35/7.5 or 15
Isolation classⅡ
LED indicator for power on
100% full load burn-in test
2 year warranty

SPECIFICATIONS

OUTPUT

 

Model

DR-15-5

DR15-12

DR-15-15

DR-15-24

DC Voltage

5V

12V

15V

24V

Rated Current

2.4A

1.25A

1A

0.63A

Current Range

0-2.4A

0-1.25A

0-1A

0-0.63A

Rated Power

12W

15W

15W

15.2W

Ripple & Noise

80mVp-p

120mVp-p

120mVp-p

150mVp-p

Voltage Adj. Range

-5%,+10%

±10%

±10%

±10%

Voltage Tolerance

±2%

±1%

±1%

±1%

Setup, Rise, Hold Up Time

1000ms, 50ms/230VAC 1000ms, 50ms/115VAC at full load70ms/230VAC          16ms/115VAC at full load

 

 

INPUT

 

Voltage Range

85 ~ 264VAC          120 ~ 370VDC

AC Current

0.88A/115VAC          0.48A/230VAC

Efficiency

74%

84%

83.5%

85%

Inrush Current

COLD START 35A/115VAC          65A/230VAC

 

 

PROTECTION

 

Over Load

105%~160%

Protection type: Constant current limiting, recovers automatically after fault condition is removed

Over Voltage

115%~135%

Protection type: Shut down o/p voltage, re-power on to recover

 

 

ENVIRONMENT

 

Working Temp., Humidity

-10℃~+60℃; 20%~90%RH

Storage Temp., Humidity

-40℃~+85℃; 10%~95%RH

Temp. Coefficient

±0.03%/℃(0~50℃)

Vibration

10~500Hz, 2G 10min./1cycle, period for 60min, each along X, Y, Z axes

 

 

SAFETY

 

Withstand Voltage

I/P-O/P: 3KVAC

Isolation Resistance

I/P-O/P: 100M Ohms / 500VDC

 

 

STANDARD

 

Safety Standard

Design refer to UL60950-1,TUV EN60950-1,EN50178

EMC Standard

Design refer to EN55011,EN55022,EN61000-3-2,-3,EN61000-4-2,3,4,5,6,8,11,ENV50204,EN55024,EN61000-6-2,EN61204-3

 

 

OTHERS

 

Dimension

25*93*56mm(L*W*H)

Weight

0.15Kg

Packing

140pcs/carton

 

 

NOTE

 

1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature.

2. Ripple & noise are measured at 20MHz of bandwidth by using a 12” twisted pair-wire terminated with a 0.1μ & 47μ parallel capacitor.

3. Tolerance: includes set up tolerance, line regulation and load regulation.

4. The power supply is considered a component which will be installed into final equipment. The final equipment must be re-confirmed that it still meets EMC directives.

 











Online Inquiry

Related Products