products

Product Detail

800W Single Output with Parallel Function        SCN-800 series

Features:
High reliability, low ripple
AC input range selected by switch
Protections: Short circuit/ Over load/ Over voltage/ Over temperature
Built-in remote ON-OFF control and remote sense function
With parallel function
Can adjust from 20%~100% output voltage by external control 1-5V
Forced air cooling by built-in DC fan
2 years warranty

SPECIFICATIONS

OUTPUT

 

MODEL

SCN-800-12

SCN-800-15

SCN-800-24

SCN-800-30

DC Voltage

12V

15V

24V

30V

Rated Current

66A

54A

33A

26.7A

Current Range

0-66A

0-54A

0-33A

0-26.7A

Rated Power

800W

800W

800W

800W

Ripple & Noise

150mVp-p

150mVp-p

240mVp-p

300mVp-p

Voltage Adj. Range

±5%; Can adjust from 40%~100% output voltage by external control 2-5V

Voltage Tolerance

±1%

±1%

±1%

±1%

Setup,Rise,Hold Up Time

800ms, 50ms, 16ms at full load

 

 

INPUT

 

Voltage Range

90~130VAC/180~260VACselected by switch47~63Hz; 260~370VDC

AC Current

13A/115VAC8.0A/230VAC

Efficiency

80%

81%

85%

86%

Inrush Current

60A/230V

Leakage Current

3.5mA/240VAC

 

 

PROTECTION

 

Over Load

110%~135%

Protection: Protection: Current limiting, delay shut down o/p voltage, re-power on to recover

Over Voltage

110%~135%

Protection type: Shut down o/p voltage, re-power on to recover

Over Temp

TSW1 (Power transistor) When temp. >100, shut down o/p voltage, re-power on to recover

 

 

ENVIRONMENT

 

Working Temp., Humidity

-10~+65; 20%~90%RH

Storage Temp., Humidity

-20~+85; 10%~95%RH

Vibration

10~200Hz, 2G 10min./1cycle, period for 60min, each along X, Y, Z axes

 

 

SAFETY

 

Withstand Voltage

I/P-O/P, I/P-FG:1500VAC

Isolation Resistance

I/P-O/P, I/P-FG, >100M Ohms / 500VDC

 

 

STANDARD

 

Safety Standard

Design refer to UL1950,CSA22.2,IEC60950

EMC Standard

Design refer to FCC Part 15 Class A

 

 

OTHERS

 

Dimension

291*132*68mm(L*W*H)

Weight

2.57Kg

Packing

6pcs/15.42kg/CARTON

 

 

NOTE

 

1.All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25of ambient temperature.

2. Ripple & noise are measured at 20MHz of bandwidth by using a 12”twisted pair-wire terminated with a 0.1μ & 47μ parallel capacitor.

3. Tolerance: includes set up tolerance, line regulation and load regulation.

4. The power supply is considered a component which will be installed into final equipment. The final equipment must be re-confirmed that it still meets EMC directives.

Online Inquiry