products

Product Detail

60W Quad Output Switching Power Supply    Q-60 series

Features:
High efficiency, high reliability
Universal AC input/ full range
Protections: Short circuit/ Over load/ Over voltage
Cooling by free air convection
LED indicator for power on
Fixed switching frequency at 35KHz
2 year warranty

SPECIFICATIONS
OUTPUT
Model Q-60B Q-60C Q-60D
Output number CH1 CH2 CH3 CH4 CH1 CH2 CH3 CH4 CH1 CH2 CH3 CH4
DC Voltage 5V 12V -5V -12V 5V 15V -5V -15V 5V 12V 24V -12V
Rated Current 5.5A 2A 0.5A 0.5A 5.5A 1.5A 0.5A 0.5A 4A 1A 1A 0.5A
Current Range 0.5-8A 0.1-3A 0-1A 0-1A 0.5-8A 0.1-3A 0-1A 0-1A 0.5-8A 0.1-3A 0.1-1.5A 0-1A
Rated Power 60W 60W 60W 60W 60W 60W 60W 60W 60W 62W 62W 62W
Ripple & Noise 100mVp-p 120mVp-p 100mVp-p 120mVp-p 100mVp-p 120mVp-p 100mVp-p 120mVp-p 100mVp-p 120mVp-p 150mVp-p 120mVp-p
Voltage Adj. Range CH1: -5%, +10% CH1: -5%, +10% CH1: -5%, +10%
Voltage Tolerance ±2% ±6% ±5% ±5% ±2% 8% -4% ±5% ±5% ±2% ±6% 8% -4% ±5%
Setup,Rise,Hold Up Time  1600ms,20ms,12ms/115VAC800ms,20ms, 60ms/230VAC at full load
INPUT
Voltage Range 85~264VAC47-63Hz; 120~370VDC
AC Current 2A/115V0.8A/230V
Efficiency 70% 72% 75%
Inrush Current Cold start 18A/115V36A/230V
Leakage Current <1mA/240VAC
PROTECTION
Over Load 105%~150%/115VAC
Protection type: Shut down o/p voltage, recovers automatically after fault condition is removed
Over Voltage 5V:115%~135%
Protection type: Hiccup mode, recovers automatically after fault condition is removed
ENVIRONMENT
Working Temp., Humidity -10~+60; 20%~90%RH
Storage Temp., Humidity -20~+85; 10%~95%RH
Vibration 10~500Hz, 2G 10min./1cycle, period for 60min, each along X, Y, Z axes
SAFETY
Withstand Voltage I/P-O/P: 3KVACI/P-FG: 1.5KVACO/P-FG: 0.5KVAC
Isolation Resistance I/P-O/P, I/P-FG, O/P-FG: 100M Ohms/500VDC
STANDARD
Safety Standard Design refer to UL60950
EMC Standard Design refer to EN55022,EN61000-3-2,-3, EN61000-4-2,3,4,5,6,8,11; ENV50204
OTHERS
Dimension 159*97*38mm(L*W*H)
Weight 0.56Kg
Packing 24pcs/14.4Kg/0.75CUFT
NOTE
1.All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature.
2.Ripple & noise are measured at 20MHz of bandwidth by using a 12”twisted pair-wire terminated with a 0.1μ &47μparallel capacitor.
3.Tolerance: includes set up tolerance, line regulation and load regulation.
4.The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives.

Online Inquiry

Related Products